Specifically designed for applications where flammable vapors are cause for concern, like clean room, chemical plant, or refinery environments by eliminating the sparks or arc in the exit switch. For use in hazardous and corrosive environments. Class I, Zone 1, AEx de IIC T6...T4 Gb / Ex de IIC T6...T4 Gb X Zone 21, AEx tb IIC T85°C...T135°C Db IP66 / Ex tb IIC T85°C...T135°C Db IP66 X Class I, Division 2, Groups A, B, C, D Class II, Division 2, Groups E, F, G Class III UL50, 50E, 508, UL60079-0, -1, -7, -31Type 3, 4, 4X, 12, 13


  • Impact Resistant Non-Metalic Antistatic Material.
  • No moving parts, virtually maintenance free.
  • Corrosion Proof with F1 UV Protection.
  • 1.5” Mushroom Button (Green or Red).
  • Silicone Gasket on Enclosure and Actuator.
  • Explosion Protected Contact Blocks.
  • Clearance for 3/4” Bottom Feed NPT Fitting.
  • Classified for Hazardous Locations.
  • IEC Rating DC60V 5A DC-13.

For further details download the following datasheet:

Do You Have Any Query?

Do Connect With Us


Williams Tower, 41st Floor, 2800 Post Oak
Boulevard, Houston, TX 77056, USA

Opening Hours

Mon-Fri (9.00AM-6:00PM)
Sat-Sun (Closed)

Drop Message